The 3008 is based on Peugeot's short wheelbase platform 2, which was chosen due to its exceptional rigidity and excellent acoustic and vibration properties.
The 3008 structure has been carefully designed to provide maximum secondary safety as well as provide a structure with the same level of rigidity of that of a saloon. To reduce emissions and, therefore fuel consumption and running costs, the weight of the vehicle was kept to a minimum.
To help reduce the vehicle's weight, laser welding was used instead of normal spot welding, the front overhang was kept to a minimum by the introduction of an innovative new type of impact absorber, a number of light weight materials were used and the thickness of the panoramic glass roof has also reduced to just 5 mm, while still retaining the same levels of safety as current roofs fitted to the 308 SW etc.
Hybrid 4 Technology
This name describes the hybridisation of a traditional engine with an electric motor, in an original layout in engineering terms that also allows the possibility of four wheel drive.
While the traditional engine is located as usual under the bonnet and drives the front wheels, the electric motor is located under the load area floor adjacent to the rear suspension. This technology not only represents a real breakthrough in terms of fuel consumption and CO2 emissions (a reduction of around 35%), but also in terms of four wheel drive.
At the Paris Motor Show, the Prologue Hybrid 4 concept car was presented with a 2.0 litre HDi FAP engine with a power of 163 bhp and an electric motor with a maximum capacity of 37 bhp providing a maximum torque of 300 Nm at the front and 200 Nm at the rear. Despite this performance, its fuel consumption in the combined cycle is only 4.1 litres / 100 km, with CO2 emissions of just 109 g/km!
This technology makes it possible to combine dynamic performance with respect for the environment, while at the same time maintaining the benefits of a spacious vehicle.
Another important benefit is that there are no mechanical connections between the front diesel engine and the rear electric motor, everything is controlled electronically "by-wire". This avoids any architectural constraints affecting the interior space and style of the passenger compartment.
The HYbrid 4 technology, which is still under development, was incorporated into the T84 programme from the very outset, since it is fully consistent with the approach adopted for the vehicle. In accordance with the announcement made at the Paris Motor show, the 3008 will be the Group's first vehicle to be equipped with Hybrid 4 technology. The commercial launch of this four wheel drive hybrid cross-over is planned between now and 2011.
Powered by the Just Good Cars network Making it easier to sell your car
Peugeot Partner Origin is a registered trademark and Justpartnerorigincars.com is not affiliated, sponsored by, authorized by, sanctioned by Peugeot or the owner of this trademark.
Sign In | Sell My Car » 
